Free U.S. Shipping | Made in the USA

Wholesale program open Apply here

How to Winterize Fuel in Boats, RVs, Generators and Small Engines

PlanetSafe GT-DT gas or diesel fuel treatment 32 oz bottle for winterizing stored fuel

PlanetSafe Lubricants |

If your boat, RV, generator, snowblower or lawn equipment is about to sit for the winter, the fuel in the tank is the part most likely to cause trouble in spring. Old fuel breaks down, ethanol blends pull in moisture, and the varnish and corrosion that follow are what clog carburetors and injectors while the machine sits.

The good news: protecting stored fuel takes about 15 minutes per machine. Here's how to do it.

Why fuel goes bad in storage

  • Gasoline oxidizes. The lighter parts of gasoline evaporate and the rest slowly oxidizes into gums and varnish. Small engines with tiny carburetor passages are the first to suffer.
  • Ethanol attracts water. Most pump gas is E10. Ethanol absorbs moisture from the air, and once a tank holds enough water the ethanol and water can separate from the gasoline and settle at the bottom, right where the fuel pickup is.
  • Diesel grows things. Water in a diesel tank lets microbes grow at the fuel and water boundary. The sludge they create plugs filters.
  • Condensation. Air in a half-empty tank warms and cools every day, and that air leaves water behind on the tank walls.

How to winterize fuel, step by step

  1. Start with fresh fuel. Don't store a machine on fuel that's already months old. Run it down and refill with fresh fuel from a busy station.
  2. Add a fuel treatment before you fill. Pouring it in first lets the fresh fuel mix it as it goes in.
  3. Fill the tank most of the way. Less air space means less condensation. On boats, follow the manufacturer's guidance and leave some room for expansion.
  4. Run the engine for 5 to 10 minutes. This pulls treated fuel through the pump, lines, carburetor or injectors, so the whole fuel path is protected, not just the tank.
  5. Store it and forget it. In spring, top off with fresh fuel and the engine should start the way it did in fall.

What to use

PlanetSafe GT-DT Gas or Diesel Fuel Treatment is one formula for gasoline or diesel, so the same bottle covers the boat, the generator, the truck and the tractor. It helps clean injectors, lubricates the fuel pump and upper cylinders, and helps stabilize fuel for long-term storage. The 32 oz bottle treats up to 320 gallons, which makes it the cheapest way to treat a whole garage of equipment. Dose per the label for your tank size.

It's also non-toxic, non-hazardous and odor-free, so you're not breathing solvent fumes in a closed garage while you work.

Only treating one vehicle? The 8 oz bottle is sized for a single passenger-vehicle tank.

Don't forget the oil

Fuel is half the job. Used engine oil holds acids and moisture from combustion, so changing the oil before storage, not after, keeps that out of the engine all winter. Adding OT Oil & Gear Treatment at that oil change (1 oz per 4 quarts) adds a bonded protective layer on internal metal parts for the first cold start in spring. The Engine Treatment Bundle pairs both.

Quick checklist

  • Fresh fuel in the tank
  • Fuel treatment added before filling
  • Tank filled most of the way
  • Engine run 5 to 10 minutes to circulate treated fuel
  • Oil changed before storage

Questions about treating a fleet or a shop full of equipment? Ask us about bulk and wholesale supply.

Leave a comment

Please note: comments must be approved before they are published.